How to apply a decal
What you'll need:
Non-ammonia cleaner
Lint-free cloth
Masking tape
Credit card or ruler (basically anything with a straight edge)
Hands
Step 1: Clean the surface with a non-ammonia
cleaner and lint-free cloth
Note: The application surface must be completely clean, dry and
smooth
Step 2: Position decal as desired
Step 3: Secure in place using masking tape to aid with desired positioning/alignment
Step 4: Slowly peel about 1.5" of backing off of one side
Step 5: Smooth down side with straight-edge tool
Step 6: Repeat Steps 4 and 5 in the same
direction until entire decal has been applied
Note: If air bubbles remain, use a pin or razor point to poke a
hole in the edge of the bubble to force out the air.
Step 4: Stand back and admire your work!
Contact me at cfc@auddawgs.com
or send me a personal message on facebook at Candy
CF Camin